EGS IS reads your WaterGEMS or EPANET model, applies your design rules, follows the terrain, places the valves and fittings, and builds the network in Civil 3D. Nothing is deployed until it passes validation.
Rebuilding a hydraulic model by hand in Civil 3D is slow and easy to get wrong. EGS IS does the repetitive part and checks it.
Valve spacing, air valves at high points, washouts at low points, fitting types and depths come from your rules, not from memory.
Load the survey surface and the pipes follow it, with profiles you can review before anything goes into the drawing.
Strict validation lists every error with its code and blocks the export until it is fixed, so a bad network never reaches Civil 3D.
Valve, fitting, profile, spacing and assembly rules, plus Civil 3D settings, in one window. Save them to a file and share them with the team.
Each pipe is sampled along its length. High and low points are found automatically, and that is where air valves and washouts go.
The same seven steps you see in the module's ribbon. Each one checks the one before it.
This is the first release, so you talk directly to the engineers who build it. Send us a model that gives you trouble, tell us your standards, and your requests go to the top of the list.
Available now: Water GEMS To Civil 3D. These modules are in the product and will be released one at a time.
Install EGS IS, request your free 7-day trial licence, and run your own WaterGEMS model through it.